Home >Invar 36 Bar
Hakan Nickel Alloys, a prominent manufacturer and supplier located in Istanbul, Turkey, specializes in high-quality Invar 36 Bars. These bars are specifically designed for applications that require minimal thermal expansion and precise dimensional stability. Known for their remarkable ability to retain their shape even with temperature changes, they find extensive use in aerospace, scientific instrumentation, and precision engineering. Produced under strict quality controls and adhering to international standards, Hakan Nickel Alloys guarantees that their Invar 36 Bars provide consistent performance, durability, and reliability, making them the go-to choice for critical applications where controlling thermal expansion is essential.
Invar 36 Bars are primarily made up of iron (about 64%) and nickel (around 36%), along with small amounts of carbon and other alloying elements. This unique composition results in an exceptionally low coefficient of thermal expansion (approximately 1.2 × 10⁻⁶ /°C), ensuring that they maintain their dimensions across a wide temperature range. In terms of mechanical properties, Invar 36 offers moderate tensile strength (roughly 500–700 MPa), good ductility, and excellent toughness. Its low thermal expansion, combined with corrosion resistance and ease of machining, makes it perfect for precision components and structural applications that need to withstand thermal stress.
| Standards : | ASTM F1684, ASME SF1684 |
| Dimensions : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Wire : | Thickness starting from 0.05mm |
| Round bar size : | Diameter: 3-~800mm |
| Hex Bar size : | 2-100mm A/F |
| Flat bar size : | Thickness: 2 -100mm / Width: 10 to 500mm |
| Square bar size : | 4 to 100mm |
| Rectangular Bars Size : | 33 x 30mm to 295 x 1066mm |
| Hollow Bar : | 32mm OD x 16mm ID to 250mm OD x 200mm ID |
| Tolerance : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Grade | C | Mn | Si | S | Fe | Ni | Cr | P | Mo | Co |
| Invar 36 | 0.10 max | 0.06 max | 0.35 max | 0.025 max | Rem | 35-38 | 0.50 max | 0.025 max | 0.50 max | 1.0 max |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Psi – 71,000 , MPa – 490 | Psi – 35,000 , MPa – 240 | 42 % |
At Hakan Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Invar 36 Bar in Istanbul, Turkey, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Turkey, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Invar 36 Bars are widely utilized in the aerospace industry for satellite structures, precision instruments, and aircraft components where minimal thermal deformation is crucial. They are also used in tooling, jigs, and fixtures for high-accuracy measurement systems and molds for electronic devices. Scientific and optical instruments, including gyroscopes, telescopes, and clocks, depend on Invar 36 for maintaining dimensional consistency. Furthermore, these bars are essential in industrial machinery and precision engineering applications, where thermal stability is key to ensuring accuracy and reliability. Their unique properties make Invar 36 Bars indispensable in environments that demand precision.
